Welcome to myChimaera.com

Front  Rear   Springs   Shocks   Sway bar
To  follow with our theme of use as much as possible OEM components and after few iterations we have decided to use OEM 97-14 Corvette front control arms, hubs and spindles. In case any of those components need to be replaced they are readily available.

As the engine is located in the rear and in combination of engine and tires width and at same time not having lots of vertical height and different arrangement of  springs and shocks, Corvette OEM rear control arms where too long to be accommodated in the space. Therefore a more traditional H arms had been designed for the use and custom hubs to which standard rear corvette hubs are bolted to with Corvette OEM brake setup.


All content is copyrighted 2014